remoteright.blogg.se - Virtualdj 2008

#Virtualdj 2008 update#

With power turned OFF, remove any connected USB memory or computer, and confirm that no discs are loaded.

Copy this file to your USB memory device or disc (it is essential that you do not change the file name).

After extraction, you will see the file:.

If you don't specify a folder, the extracted files will be placed in the same folder as the downloaded file.

Specify a folder for the extracted files.

Double click your downloaded file to extract the firmware.

If you use a CD-R or CD-RW, you will require a CD-R/RW Drive, CD-R/RW Writing Software and one unused CD-R or a CD-RW disc.

If you use a USB memory device, it should be formatted in FAT or FAT32.

#Virtualdj 2008 update#

You can then use the USB stick or disc to update your CDJ-400. You can download the firmware and use either a USB memory device or your CD-R/RW drive to burn the firmware to a CD-R Disc.If your firmware version is 1.33 or above, you do not need to update your CDJ-400.The system version will show on the display.Press and hold the RELOOP/EXIT button for 10 seconds.Check which version of the CDJ-400 you own

We recommend updating your CDJ-400 with the latest firmware to take full advantage of Serato's update (full details of the update are available here). Scratch Live will also send the track information directly to your CDJ-400 display. You'll only need this firmware if your CDJ-400 is lower than version 1.33.įrom version 1.8.2 (September 2008) on, you can now control Serato Scratch LIVE from the transport and buttons of the CDJ-400. This firmware will also improve the Audio Transfer when using the internal sound card with ASIO drivers, along with various other known bugs. Download firmware for your CDJ-400, making it functional as a controller for use with DJ Software Application.